|
|
METALON
SPRAY PENETRANT
is a hydrocarbon complex specifically formulated to help reduce
wear and friction of ferrous and non-ferrous metals. METALON
unites chemically with the metal component molecules,
forming a microscopic, monomolecular, wear-resistant shield.
This exclusive lubricating formula combines the extraordinary
features of METALON with other components that meet
Military Specification requirements. METALON SPRAY PENETRANT
will help to increase production and service life of equipment,
reduce down-time and crucial wasteful maintenance expenditures.
METALON
SPRAY PENETRANT
is Non-Flammable. This provides an important margin of safety
where potential hazards exist. Its high dielectric strength
permits effective cleaning and retardation of electrical corrosion.
The penetrating and "creep" properties help to free,
lubricate and protect rusted and seized components. Moisture
is driven out. A little goes a long way, which makes METALON
SPRAY PENETRANT very cost effective.
APPLICATION:
METALON SPRAY PENETRANT, aerosolized for convenience,
uses CARBON DIOXIDE (CO2)
as a propellant, which is classed as "OZONE SAFE".
Spray at a distance of 6" to 18". Gentle pressure
on the nozzle will produce a "conical" spray pattern,
whereas full nozzle pressure causes a "jet stream"
spray. The extension tube allows directional application to
remote locations. It will penetrate, clean and lubricate,
permitting the device to perform as intended. A protective
film is left on exposed surfaces to guard against rust and
corrosion.
TYPICAL
USES: Tools, Locks, Valves, Guns, Mechanical Linkages,
Rusted Bolts, Nuts and Parts, Air Tools, Fishing Gear, Electric
Motors, Jack Hammers, Sliding Mechanisms, Bicycles, Hinges,
Chainfalls, Chain Saws, Nailing and Fastening Tools, Machine
Threads, Tool & Dies, Drilling, Tapping, Metal Drawing
and Forming, Broaching, Sawing, Milling Operations, Carburetor
Linkages, Motorbikes, etc.
NOTE:
METALON SPRAY PENETRANT should by used only with adequate
ventilation. Avoid prolonged inhalation of vapours. Some plastics,
natural rubber and paint finishes may be adversely affected
by overspray. Test on an inconspicuous area first to insure
safe application. METALON SPRAY PENETRANT cannot repair
mechanical or electrical defects.
INSPECTION
DATA:
| DESCRIPTION |
ASTM METHOD |
TEST RESULTS |
| Specific Gravity |
D-482 |
1.275 |
| Pour Point °F
(°C) |
D-97 |
-70 (-57) |
| Flash Point |
D-92 |
NON-FLAMMABLE |
| Copper Strip
Corrosion Test |
D-130 |
1a |
| @140°F for
3 hours |
|
PASS |
| Dielectric Strength |
D-117 |
37 KV |
| COMPONENT
DESIGNATIONS: |
Military |
MIL-C-23411
|
| |
Joint
Services |
PX
24 |
| |
NATO |
C-634 |
PACKAGING: METALON SPRAY PENETRANT is
packaged 12 (400g) cans per case.
NOTE: The
information and data presented herein are based on tests, reports,
and research we believe to be accurate and reliable. The information
and data are provided without warranty, guarantee or liability
on our part, and are therefore, provided to customers for their
own investigation, verification, and consideration. |
|
