|
METALON M is
a hydrocarbon complex specifically formulated to help reduce
friction and wear of ferrous and non-ferrous metals and save
energy. Unlike oil additives, METALON M unites chemically
with the metal component molecules to form a microscopic,
monomolecular wear-resistant shield. Blended with most synthetic
or petroleum oils, the exclusive METALON M formula
helps to reduce maintenance costs and increase production
and service life of mechanical equipment.
When combined with conventional metal cutting and machining
oils, METALON M helps to maintain the sharpness of
the tool cutting edges, allows deeper cuts per pass, while
producing a smoother finish with less energy.
Applied to the lubrication systems of the new equipment, METALON
M substantially reduces the extensive wear and metal removal
associated with 'break-in' periods; thereby increasing equipment
longevity. METALON M creates a burnished, precision
fit between mating parts, which reduces friction.
One of the significant and unique characteristics of METALON
M is its chemical bonding capability. METALON M
will not drain off metal surfaces during idle periods,
but rather remains in place to protect the parts during
cold starts.
METALON M is applied at a ratio of 5% (min.) or 100mL
for every two litres of lubricant to: Crankcases, Mechanical
Gearboxes, Differentials, Transfer Boxes, Sliding Mechanisms,
Cutting and Machining Oils, Bearings, Filtered Compressor
Sumps, Bushings and much more. (Some applications may require
a higher ratio of METALON M to realize maximum benefit
as dictated by results and experience.)
INSPECTION DATA:
(According to ASTM Specifications)
| DESCRIPTION |
ASTM |
RESULTS |
| Specific
Gravity |
D-1298 |
1.015 |
| Colour |
D-1500 |
1.5 |
| Flash
Point °F (°C) |
D-992 |
200
(94) |
| Cloud
Point °F (°C) |
D-97 |
-40.
(-40) |
| Pour
Point °F (°C) |
D-97 |
-60.
(-51) |
| Viscosity,
SUS |
D-445 |
|
| @
100 °F (40 °C) |
|
57 |
| |
|
9.50
cSt |
| @
210 °F (100°C) |
|
29.0 |
| |
|
1.90
CST |
| Viscosity
Index |
|
30.0 |
| Rust
Test by |
|
|
| Synthetic |
|
|
| Sea
Water |
|
D-665
|
| PASS |
|
|
| Corrosion
Test, |
|
|
| Copper
Strip |
|
|
| @
212 °F (100 °C) |
D-130 |
NO
CORROSION |
| Foam
Test (1,2,3) |
D-892 |
NO
FOAM |
| Ash
Content |
D-482 |
.6%
by wt. |
| TIMKEN
OK LOAD? |
|
|
| @
5% concentration |
D-2782
|
>
60 lbs |
| FALEX
FINAL TORQUE |
|
|
| @4500
lb. Jaw Load |
D-2271 |
<
60 in.-lb |
NOTE: The
information and data presented herein are based on tests, reports,
and research we believe to be accurate and reliable. The information
and data are provided without warranty, guarantee or liability
on our part, and are therefore, provided to customers for their
own investigation, verification, and consideration. |
