|
|
MEGALENE GAS SYSTEM
TREATMENT, now with METALON,
is a new and improved hydrocarbon complex that incorporates
components which are ashless, non-phophorous, and perform
as multi-functional detergents and dispersants. Supplementary
to the data below, these proprietary components exceed
the Military Specifications MIL-I-25017C, providing excellent
rust protection in both leaded and unleaded gasolines.
Extensive
engine tests were conducted on 250 CID, 216 CID straight six-cylinder
engines as well as 350 CID V-8 and 140 CID four-cylinder engines.
Positive results in carburetor and fuel injector detergency,
anti-icing, intake valve deposit cycling and octane requirement
tests were achieved, respectively.
MEGALENE
GAS SYSTEM TREATMENT, with METALON can be added
to all gasolines used in internal combustion engines. It is
compatible with catalytic converters.
MEGALENE
GAS SYSTEM TREATMENT exclusive formulation, used consistently
as recommended, helps to:
| >LUBRICATE
THE UPPER CYLINDER |
>MAINTAIN
OPTIMUM CARBURETOR |
>NEUTRALIZE
ACIDS |
| COMPONENTS |
AND
FUEL INJECTOR PERFORMANCE |
>IMPROVE
COLD WEATHER STARTS |
| >ENHANCE
COMBUSTION |
>CLEAN PVC
SYSTEM |
>PREVENT
FUEL SYSTEM ICING |
| >CLEAN VARNISH
AND GUM RESIDUES |
>REDUCE BLOW-BY
OIL DILUTION |
>MAINTAIN
EMISSION CONTROL |
| THROUGHOUT
THE FUEL SYSTEM |
>CONTROL
CONDENSATION |
SYSTEM
EFFICIENCY |
| >ELIMINATE
CARBON DEPOSITS |
>REDUCE SLUDGE
FORMATION |
>IMPROVE
ECONOMY |
| >FREE STICKY
VALVES |
>PREVENT
ENGINE "RUN-ON" |
>ARREST RUST
AND CORROSION |
RECOMMENDATIONS: MEGALENE GAS SYSTEM TREATMENT
highly-concentrated formula is very cost-effective. For
the first 200 litres (
U.S. gallons) of gasoline, add 20mL (.75
oz.) to every 40L (10gal.)
(For rapid results, slowly pour 50mL directly into
the carburetor with the engine at fast idle.) Regularly
add 10mL for every 40 litres.
CAUTION: MEGALENE is flammable.
Keep away from open flame or spark. It contains petroleum
distillates. If swallowed, DO NOT induce vomiting. Call
a physician immediately.
INSPECTION
DATA:
| DESCRIPTION |
ASTM
METHOD |
TEST
RESULTS |
| Specific
Gravity @ 60°F |
D-1298 |
0.8454 |
| Appearance |
D-1500 |
CLEAR |
| Flash
Point °F (Closed Cup) |
D-93 |
68 |
| Pour
Point °F |
D-97 |
-55 |
| Viscosity
SUS @ 100 °F |
D-88 |
40.0
(4.25 cSt) |
| Corrosion
Test-Copper strip @ 212°F |
D-139 |
1a
- PASS |
NOTE: The information and
data presented herein are based on tests, reports, and research
we believe to be accurate and reliable. The information and
data are provided without warranty, guarantee or liability on
our part, and are therefore, provided to customers for their
own investigation, verification, and consideration.
|
|
